We stock a wide range of speakers cables, starting from budget designs from £1.75/per metre and upwards. Our range includes models from Atlas, Chord Cables, Audio Note, Nordost, PHY-HP, DNM, Merlin, QED, Note Products and many others.

There are very few universal cables but I suspect the Hyper range just might be one of them. Its sound is very natural and consistent throughout the frequency range
It uses the unusual combination of high purity copper (99.9997 or 5N) covered with PTFE insulation, a cotton layer is then used to space and damp the strands against the PVC outer jacket. This is our favourite cable at its price point and we have huge success with it in all manner of systems.

Three models are available, with the number referring to the square mm of copper used. The Hyper 1.5 costs £10 per metre, the Hyper 2 is £15 per metre and the Hyper 3 is £20 per metre (all these prices are plus termination if required)

The Electrofluidics Monolith 20/20 speaker cable uses closely sandwiched copper foil conductors. This give very low Inductance and resistance but naturally the capacitance is very high so it cannot be used with certain amplifiers that are not stable into this kind of load (think Naim, early Exposure and so on, but please contact us to discuss suitability with your amplifier). The costs is £45 per mono metre including 4mm banana plug terminations, and spade or BFA’s are available as an extra cost option.
Its sound is very well balanced, with a warm presentation that isn’t overly analytical and with superb sense of dynamic realism.

The InterNote is the result of the research we did when designing our top PurerNote cables (see below). This design shares many of the same features - it uses Silver wire throughout with cotton insulation, and offers a lot of the information retrieval of our top design in a more affordable package.

The Signature is a real monster of a cable, it may not be the most flexible or discrete design, but the conductors of their flagship cable use a design derived for microwave frequency use to very good effect. This cable is particularly well suited to transistor electronics (although not exclusively), it has a powerful sound that at first listen can seem a touch dark at the upper frequencies, but its a very refined performer with strengths that grow on you after just a few moments. Its particular strength is the way it integrates bass seamlessly with the lower mid band, which may seem an odd thing to write but you need to hear it to realise how most cables change their character in this region.

The cable is available in two colour schemes (Red & Black or Black and Black) as shown in the picture below.

The PurerNote speaker cable uses high purity silver conductors covered in natural cotton insulation for the most natural and dynamic sound possible. These cables are extremely labour intensive to build and use very high grade materials which means this no compromise cable is not inexpensive, but for those with a system deserving this level of conductor the results are quite stunning. This is the closest we can get to a cable that disappears, it has a benign character thanks to the use of natural, non synthetic materials wherever possible. It is especially suited to horn speakers and other ultra revealing loudspeaker designs.

Back to Products